Advantages
- High volume yield provides economical void filling solutions.
- Simplified equipment provides ease of mixing and aeration, with no special pre-foaming equipment required.
- Different wet densities can be achieved without any sophisticated plant.
- Low compressive strength provides high energy absorption characteristics.
| Composition | Description |
| OPC | CEM 1 42,5 |
| Optional extenders – Silica Fume / GGBS / PFA | Foaming agents |
Standards Compliance
Voidcrete materials comply with the requirements of SABS ENV 197-1,
1200G 1491-1/2/3.
Range of Products
| Product | Bag size | Water Addition | Yield Bags/m3 mix |
| Voidcrete | 25 kg | ±25,0 l/bag | ±6bags |
Performance
| Product | Bag size | Compressive Strengths |
| Voidcrete | 25 kg | 0,3 MPa min. @ 28 days |
Relative Density
Voidcrete normally has a wet relative density of 0,24 to 0,40. This can be varied to customer requirements by means of adjustments on the mixer/pump unit.
Packaging
Outer bag: Virgin, woven, pre-printed, polypropylene bag, with stitched polyester seams. Colour coded for easy identification of product.
Storage
Materials should normally be stored under cover. Reduced shelf life may occur if packaging is exposed to the elements. Packaging materials may deteriorate, allowing moisture ingress into the cementitious binder. This could lead to premature hardening.
Shelf Life
Voidcrete products will store for up to 6 months in dry conditions.
Safety
| General | The use of eye protection, gloves and dust masks is recommended. Follow the typical precautions as prescribed for handling Portland cement. |
| Inhalation | Constant exposure over long periods of time to very high concentrations may cause a cough with phlegm. |
| Skin contact | Prolonged exposure could sensitize skin causing mild irritation. In extreme cases, dermatitis could occur. |
| Eyes | Use eye protection. However, if eyes become affected, irrigate eyes with copious amounts of clean water. Seek medical attention. |
| Ingestion | Ingestion of harmful quantities is unlikely to occur. If ingested, drink copious amounts of drinking water and consult a medical practitioner. DO NOT INDUCE VOMITING. |
Technical Support, Servicing and Testing
Technicrete provides full support and back-up on both the technical and practical aspects of our products. We provide on-site assistance and underground training. All product performance is continuously monitored by means of regular testing at accredited laboratories.
Important Note
Technicrete products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale. Whilst Technicrete endeavours to ensure that any advice, recommendation, specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where and how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or not in accordance with any advice, specification, recommendation or information given by it.