Buildmix Request Quote

Buildmix is a pre-bagged material used for producing building mortar.


  • Buildmix is a cohesive cementitious mortar that provides easy mixing and application characteristics.
  • Correctly batched components prevent poor quality mixes being used.
  • Careful selection of aggregates provides excellent yields, resulting in economic benefits.
  • Mix design produces final strengths that are compatible with brick or block strengths, if correct water/cement ratios are used.


Composition Description
OPC CEM 1 42,5
Alternative option – Masonry Cement Building Sand ≤ 5% moisture content


Standards Compliance
Buildmix materials comply with the requirements of SABS ENV 197-1, ENV 413-1, & 1090.


Range of Products

Product Bag size Water Addition Yield Bags/m3 mix
Buildmix 30 kg ± 2,7 l/bag ± 68bags



Product Compressive Strengths
Buildmix Class II mortar 5 MPa min. @ 28 days



Outer bag Inner bag
Virgin, woven, pre-printed, polypropylene bag, with stitched polyester seams. Colour coded for easy identification of product. Virgin, low density, polyethylene bag with heat-sealed sides and bottom seams.


Materials should normally be stored under cover. Reduced shelf life may occur if packaging is exposed to the elements. Packaging materials may deteriorate, allowing moisture ingress into the cementitious binder. This could lead to premature hardening.


Shelf Life
Buildmix products will store for up to 6 months in dry conditions.



General The use of eye protection, gloves and dust masks is recommended. Follow the typical precautions as prescribed for handling Portland cement.
Inhalation Constant exposure over long periods of time to very high concentrations may cause a cough with phlegm.
Skin contact Prolonged exposure could sensitize skin causing mild irritation. In extreme cases, dermatitis could occur.
Eyes Use eye protection. However, if eyes become affected, irrigate eyes with copious amounts of clean water. Seek medical attention.
Ingestion Ingestion of harmful quantities is unlikely to occur. If ingested, drink copious amounts of drinking water and consult a medical practitioner. DO NOT INDUCE VOMITING.


Technical Support, Servicing and Testing
Technicrete provides full support and back-up on both the technical and practical aspects of our products. We provide on-site assistance and underground training. All product performance is continuously monitored by means of regular testing at accredited laboratories.


Important Note
Technicrete products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale. Whilst Technicrete endeavours to ensure that any advice, recommendation, specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where and how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or not in accordance with any advice, specification, recommendation or information given by it.