The Technimix range of products are pre-bagged mixes for all concrete requirements.
Advantages
- Technimix provides a wide range of compressive strength options, allowing various performance demands to be met.
- Correctly proportioned components eliminate batching errors, which could cause subsequent material failure.
- Box fronts, drains, sumps, dams, machinery plinths and floors are easily constructed using Technimix products.
- Technimix concrete is economical to use and easy to transport to the working area.
Composition | Description |
OPC | CEM 1 42,5 |
Optional extenders – GGBS / PFA | As required |
Optional Admixtures | Plasticisers |
Coarse Aggregate | Crushed Stone |
Fine Aggregate | Crusher / River |
Standards Compliance
Technimix materials comply with the requirements of SABS ENV197-1, 1083,
1200G & 1491-1/2.
Range of Products
Product | Bag size | Water Addition | Yield Bags/m3 mix |
Technimix 15 MPa | 25 kg | ±1,6 l/bag | ±90 bags |
Technimix 25 MPa | 25 kg 30 kg 50 kg |
±1,9 l/bag ±1,6 l/bag ±3,2 l/bag |
±90 bags ±75 bags ±45 bags |
Technimix 30 MPa | 25 kg 30kg |
±1,6 l/bag ±1,9 l/bag |
±90 bags ±75 bags |
Technimix 40 MPa | 25 kg 30kg |
±1,7 l/bag ±2,0 l/bag |
±90 bags ±75 bags |
Technimix 50 MPa | 25 kg 30kg |
±1,7 l/bag ±2,0 l/bag |
±90 bags ±75 bags |
Technimix 60 MPa | 30kg | ±2,0 l/bag | ±75 bags |
Performance
Product | Compressive Strength@ 28 days | Slump |
Technimix 15 MPa | 15 MPa min | ±60mm |
Technimix 25 MPa | 25 MPa min | ±60mm |
Technimix 30 MPa | 30 MPa min | ±60mm |
Technimix 40 MPa | 40 MPa min | ±60mm |
Technimix 50 MPa | 50 MPa min | ±60mm |
Technimix 60 MPa | 60 MPa min | ±60mm |
Packaging
Outer bag | Inner bag |
Virgin, woven, pre-printed, polypropylene bag, with stitched polyester seams. Colour coded for easy identification of product. | Virgin, low density, polyethylene bag with heat-sealed sides and bottom seams. |
Storage
Materials should normally be stored under cover. Reduced shelf life may occur if packaging is exposed to the elements. Packaging materials may deteriorate, allowing moisture ingress into the cementitious binder. This could lead to premature hardening.
Shelf Life
Technimix products will store for up to 6 months in dry conditions.
Safety
General | The use of eye protection, gloves and dust masks is recommended. Follow the typical precautions as prescribed for handling Portland cement. |
Inhalation | Constant exposure over long periods of time to very high concentrations may cause a cough with phlegm. |
Skin contact | Prolonged exposure could sensitize skin causing mild irritation. In extreme cases, dermatitis could occur. |
Eyes | Use eye protection. However, if eyes become affected, irrigate eyes with copious amounts of clean water. Seek medical attention. |
Ingestion | Ingestion of harmful quantities is unlikely to occur. If ingested, drink copious amounts of drinking water and consult a medical practitioner. DO NOT INDUCE VOMITING. |
Technical Support, Servicing and Testing
Technicrete provides full support and back-up on both the technical and practical aspects of our products. We provide on-site assistance and underground training. All product performance is continuously monitored by means of regular testing at accredited laboratories.
Important Note
Technicrete products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale. Whilst Technicrete endeavours to ensure that any advice, recommendation, specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where and how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or not in accordance with any advice, specification, recommendation or information given by it.